The "U-shaped" profile design, with linear insulated sheath box conductors installed on both sides, forms the track type structure of the entire busbar main line. The plug-in box adopts a high elasticity and high conductivity grounding terminal busbar for power supply. The grounding terminal material is beryllium bronze, which is widely used in socket panels and has high strength, hardness, and elasticity. Install a temperature sensor at the pins to monitor the current carrying temperature of the connector box in real-time. The plug-in box is protected by a miniature circuit breaker and has an industrial connector output to the PDU. All electrical parameters and humidity monitoring module shall be configured, and limited 485 module or LORA wireless skip communication shall be used to feed back the temperature, humidity and electrical parameters of the plug box, connector and starting unit to the terminal display module or CCR control room plug box with its own locking mechanism. After rotating in place, it shall be quickly fixed to the bottom of Bus duct through the gear mechanism. By terminal Display screen or CCR control room display. The i-Busway intelligent monitoring module can monitor all electrical parameters that can be monitored by the header cabinet. At the same time, the plug-in box is equipped with a shunt release or electric operating mechanism, and can also perform remote opening/closing control on the plug-in box.